Brexit? No problem! Send anywhere in EU without duty
Intellinet Gigabit High-Power PoE+ Injector, 1 x 30 W, IEEE 802.3at/af Power over Ethernet [PoE+/PoE] [UK Power Cord]
MPN: 560566-UK
Quick Code: B44177467
(POE PLUS INJECTOR GIGABIT- - 802.3AT/AF 1X 30W METAL UK)
![Intellinet Gigabit High-Power PoE+ Injector, 1 x 30 W, IEEE 802.3at/af Power over Ethernet [PoE+/PoE] [UK Power Cord]](images/imgB44177467.jpg)
Note: Image accuracy is not guaranteed. Please do not rely solely on the image for your purchase.
£45.26
£54.31 inc. VAT
Overseas Customers with EU-VAT number do not pay VAT. -
Verify it here
Quick Code:
B44177467
MPN:
560566-UK
Manufacturer:
Intellinet
EAN Code:
💰 Get Cash Back if paying by Debit Card or Bank Transfer!
NOTE: The information below is provided for your convenience only and we cannot guarantee its accuracy. If necessary, please verify with us before purchasing.
Intellinet Gigabit High-Power PoE+ Injector, 1 x 30 W, IEEE 802.3at/af Power over Ethernet (PoE+/PoE) (UK Power Cord)Gigabit High-Power PoE+ Injector, 1 x 30 W, IEEE 802.3at/af Power over Ethernet (PoE+/PoE) (UK Power Cord)
Reduce costs by using existing Cat5 cable to provide both power and data.The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The PoE Injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts. That's enough for even power-hungry PoE devices.
Reduce Wiring Costs
No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.
Protect Your Equipment
Now that you are running DC power to your networked equipment through the Cat5e/6 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads and high voltages.