No customs fees! Products from within the EU
HPE Networking Comware Switch 48G 4SFP+ 1-slot 5140HI
MPN: R9L62A
Quick Code: B46897696
(HPE 5140 48G 4SFP+ 1-SLOT HI SW)
Note: Image accuracy is not guaranteed. Please do not rely solely on the image for your purchase.
$3709.63
$4451.56 inc. VAT
All products on this website are available duty-free in the EU
Overseas Customers with EU-VAT number do not pay VAT. - Verify it here
Overseas Customers with EU-VAT number do not pay VAT. - Verify it here
Quick Code:
B46897696
MPN:
R9L62A
Manufacturer:
HPE
EAN Code:
💰 Get $26.71 Cash Back if paying by Debit Card or Bank Transfer!
NOTE: The information below is provided for your convenience only and we cannot guarantee its accuracy. If necessary, please verify with us before purchasing.
Management features
| Switch type | Managed |
| Switch layer | L3 |
| Quality of Service (QoS) support | ✅ |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity | 48 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Installed SFP modules quantity | 0 |
| Installed SFP+ modules quantity | 4 |
Network
| Networking standards | IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1x, IEEE 802.3at |
| 10G support | ✅ |
Data transmission
| MAC address table | 32000 entries |
| Switching capacity | 336 Gbit/s |
| Throughput | 180 Mpps |
| Packet buffer memory | 4 MB |
Design
| Rack mounting | ✅ |
| Stackable | ✅ |
| Form factor | 1U |
Performance
| Physical stacking (units) | 9 |
| Internal memory | 2048 MB |
| Flash memory | 512 MB |
Power
| Power source | AC |
| Power supply included | ✅ |
| AC input voltage | 100 - 240 V |
| DC input voltage | 48 - 60 V |
| Power consumption (typical) | 96 W |
| Power consumption note | 96 W (dual DC) |
| Power supply note | 2 power supply slots 1 minimum power supply required |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) | ✅ |
| Total Power over Ethernet (PoE) budget | 720 W |
Other features
| Latency | < 5 microseconds (64-byte packets) |
| Memory and processor | 2 GB SDRAM; Packet buffer size: 4 MB, 512 MB flash |
| Performance management | HPE IMC; Smart MC, command-line interface; web browser; SNMP manager |
| I/O ports | 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T), 4 1/10G SFP+ ports, 1 port expansion module slot. |
| Weight (imperial) | 4.81 kg (10.6 lbs) |
| Dimensions (W x D x H) (imperial) | 43.7 x 439.9 x 359.9 mm (1.72 x 17.3 x 14.2") |
Weight & dimensions
| Width | 43.7 mm |
| Depth | 440 mm |
| Height | 360 mm |
| Weight | 4.8 kg |