No customs fees! Products from within the EU
HPE Networking Comware Switch 48-Port 1GBaseT 4XG 2QSFP+ 5901AF
MPN: JL864A
Quick Code: B46241698
(HPE FlexFabric 5901AF 48-Port 1GBaseT 4XG 2QSFP+ Switch - Switch - L3 - Managed - 48 x 10/100/1000 + 4 x 10 Gigabit Ethernet / 1 Gigabit Ethernet SFP+ + 2 x 40 Gigabit QSFP+ - rack-mountable)
Note: Image accuracy is not guaranteed. Please do not rely solely on the image for your purchase.
$6609.00
$7930.80 inc. VAT
All products on this website are available duty-free in the EU
Overseas Customers with EU-VAT number do not pay VAT. - Verify it here
Overseas Customers with EU-VAT number do not pay VAT. - Verify it here
Quick Code:
B46241698
MPN:
JL864A
Manufacturer:
HPE
EAN Code:
💰 Get $47.58 Cash Back if paying by Debit Card or Bank Transfer!
NOTE: The information below is provided for your convenience only and we cannot guarantee its accuracy. If necessary, please verify with us before purchasing.
Management features
| Switch type | Managed |
| Switch layer | L3 |
| Quality of Service (QoS) support | ✅ |
Ports & interfaces
| Basic switching RJ-45 Ethernet ports quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | ❌ |
| SFP+ module slots quantity | 48 |
Network
| Networking standards | IEEE 802.1D, IEEE 802.1Qau, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1ab, IEEE 802.1ag, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ah |
| 10G support | ✅ |
| Flow control support | ✅ |
| Link aggregation | ✅ |
| Spanning tree protocol | ✅ |
| VLAN support | ✅ |
Data transmission
| MAC address table | 16000 entries |
| Switching capacity | 336 Gbit/s |
| Throughput | 250 Mpps |
| Latency (10 Gbps) | 1.5 µs |
| Jumbo frames support | ✅ |
| Packet buffer memory | 12 MB |
Security
| DHCP features | DHCP client, DHCP server |
| Access Control List (ACL) | ✅ |
| IGMP snooping | ✅ |
Protocols
| Routing protocols | BGP, IP, MPLS, OSPF, RIP, VRRP |
Design
| Rack mounting | ✅ |
| Stackable | ✅ |
| Form factor | 1U |
| Product colour | Black |
Performance
| Physical stacking (units) | 9 |
| Memory type | SDRAM |
| Internal memory | 2048 MB |
| Flash memory | 1024 MB |
Power
| Power supply included | ✅ |
| Redundant power supply (RPS) support | ✅ |
| AC input voltage | 100 - 240 V |
| DC input voltage | 48 - 60 V |
| Power consumption (max) | 250 W |
| Power consumption note | 96 W (Dual AC) |
| Power supply note | 2 power supply slots 1 minimum power supply required (ordered separately) |
Power over Ethernet (PoE)
| Power over Ethernet (PoE) | ❌ |
Other features
| Latency | 1GE < 5 µs, 10GE< 3 µs, 40GE <1.2 µs (64-byte packets) |
| Memory and processor | 1 GB flash; Packet buffer size: 8 MB, 2 GB SDRAM |
| Performance management | HPE Intelligent Management Center (IMC) Command-line interface (CLI) Out-of-band management SNMP manager Telnet FTP |
| Fan | 2 fan tray slots Fan trays are not included with the switch and must be ordered separately. Use two fan trays with matching airflow direction for proper operation. Do not run the system with one fan tray for over 24 hours or without any fan tray for more than two minutes. Operate within 23°F (-5°C) to 113°F (45°C). Not following these guidelines may void your warranty. |
| I/O ports | (48) autosensing 10/100/1000 ports, Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only, (4) fixed 1000/10000 SFP+ ports, (2) QSFP+ 40GbE ports |
| Non-operating relative humidity (non-condensing) | 10 - 90% |
| Weight (imperial) | 7.5 kg (16.5 lbs) |
| Dimensions (W x D x H) (imperial) | 439.9 x 359.9 x 43.9 mm (17.3 x 14.2 x 1.73") |
Operational conditions
| Operating temperature (T-T) | -5 - 45 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Heat dissipation | 327.6 BTU/h |
Weight & dimensions
| Width | 440 mm |
| Depth | 360 mm |
| Height | 44 mm |
| Weight | 7.5 kg |
Logistics data
| Harmonized System (HS) code | 85176990 |