No customs fees! Products from within the EU
APC Accessory, Network Management Cards, USB to Dry Contact Accessory, for Network Management Cards, provides one dry contact input and two relay outputs
MPN: AP9811
Quick Code: B50876834
(APC - Network adapter cable - USB [M] - CAT 5 - black)
Note: Image accuracy is not guaranteed. Please do not rely solely on the image for your purchase.
$120.95
$145.14 inc. VAT
All products on this website are available duty-free in the EU
Overseas Customers with EU-VAT number do not pay VAT. - Verify it here
Overseas Customers with EU-VAT number do not pay VAT. - Verify it here
Quick Code:
B50876834
MPN:
AP9811
Manufacturer:
APC
EAN Code:
0731304751120
💰 Get $0.87 Cash Back if paying by Debit Card or Bank Transfer!
NOTE: The information below is provided for your convenience only and we cannot guarantee its accuracy. If necessary, please verify with us before purchasing.
APC Accessory, Network Management Cards, USB to Dry Contact Accessory, for Network Management Cards, provides one dry contact input and two relay outputsAccessory, Network Management Cards, USB to Dry Contact Accessory, for Network Management Cards, provides one dry contact input and two relay outputs
The USB to Dry Contact Accessory for NMC provides a hardware interface for connecting the host device of a Network Management Card 3 with peripheral devices. The USB to Dry Contact Accessory includes: Input: One input (labeled Contact Input) for one dry contact device, either normally open (“NO”) or normally closed (“NC”). Outputs: Two Form C (SPDT) relays (labeled Relay Output 1 & 2). The USB to Dry Contact Accessory for your Network Management Card connects to the USB port on your NMC. Through the NMC Web UI, you can specify which alarms will cause a change in the state of each relay output. You also set the actions that will occur at the host due to a change in state of your input device.